How to Get Water Out of Charging Port: There is no doubt that your smartphone is one of the most essential gadgets you own—and it’s almost always with you. Anyhow, it’s also vulnerable to water damage, especially through its charging port.
If your phone’s charging port has come into contact with water, you need to act fast to prevent long-term damage. Here’s a step-by-step guide on how to get water out of the charging port.
Also Need To Know: How to Get Water Out of Your Ears
Turn Off Your Phone Immediately
The first step in getting water out of your phone’s charging port is to turn off your phone immediately. This is a critical step because electricity and water don’t mix well. If there’s water inside your phone’s charging port, there’s a risk of a short circuit occurring if the electricity continues to flow.
A short circuit can cause permanent damage to your phone’s internal components and render it unusable. Therefore, it’s essential to turn off your phone as soon as possible to prevent any electrical current from flowing through the water inside the charging port.
To turn off your phone, press and hold the power button until the “Power Off” or “Restart” options appear on the screen. If you have an iPhone without a physical home button, press and hold the side button and either volume button until the slider appears. Drag the slider to the right to turn off your phone.
Whereas if you have an Android phone, the steps to turn off your phone may vary depending on the manufacturer and model. You can press and hold the power button until the “Power Off” option appears and then tap it to turn off your phone.
It’s important to note that you should not attempt to turn on your phone again until you’re confident that the water has been completely removed from the charging port. If there’s still water inside the charging port, turning on your phone can cause further damage to its internal components. Follow the remaining steps carefully to ensure that your phone is free of any water or moisture.
Remove Any Accessories or Case
The second step in getting water out of your phone’s charging port is to remove any accessories or cases from your phone. This will allow you to access the charging port and remove any water that’s stuck inside.
Accessories such as phone cases or screen protectors can trap moisture inside your phone and prevent it from drying out. Therefore, it’s essential to remove them to allow air to circulate freely around your phone. Additionally, removing your phone’s case will make it easier to access the charging port, which is often covered by a protective flap or rubber seal.
To remove your phone’s case, follow the instructions provided by the manufacturer. Depending on the type of case you have, you may need to use a tool such as a screwdriver or a spudger to gently pry the case open. Be careful not to use too much force as this can damage your phone’s components or scratch its surface.
Once you’ve removed your phone’s case, take a close look at the charging port. If you can see any visible moisture or debris inside, you can use a soft, dry cloth to wipe it away gently. However, avoid using any liquids or cleaning products as these can cause further damage to your phone. Instead, use a cloth that’s free of lint or fibers and gently wipe away any visible moisture.
Use a Soft, Dry Cloth to Wipe the Charging Port
The third step in getting water out of your phone’s charging port is to use a soft, dry cloth to wipe the charging port. Once you’ve removed any accessories or cases from your phone, take a close look at the charging port. If there’s visible moisture or debris inside, use a soft, dry cloth to wipe it away gently.
It’s essential to use a soft, dry cloth to avoid pushing the water further into the charging port. Avoid using paper towels or tissues as they can leave fibers inside the port, which can trap moisture and cause further damage. Instead, use a microfiber cloth or a cloth that’s free of lint or fibers.
To wipe the charging port, hold your phone so that the charging port is facing downwards. This will prevent any moisture from flowing deeper into your phone. Gently wipe the charging port with the cloth, making sure to remove any visible moisture or debris. Be careful not to apply too much pressure or force, as this can cause damage to the charging port’s delicate pins.
If there’s still visible moisture inside the charging port after wiping it with a dry cloth, you can use a hairdryer on the cool setting to dry it out further. Don’t take it near heat, as this can cause further damage to your phone.
Try Using a Can of Compressed Air
The fourth step in getting water out of your phone’s charging port is to use a can of compressed air. A can of compressed air can be a useful tool for removing any remaining moisture from inside the charging port.
To use a can of compressed air, hold your phone so that the charging port is facing downwards. Insert the nozzle of the can of compressed air into the charging port, and gently spray short bursts of air. This will help to dislodge any water droplets or debris that may be stuck inside the port. Be sure to hold the can of compressed air upright and maintain a safe distance from your phone to avoid causing any damage.
It’s important to note that you should avoid using a hairdryer in a warm or hot setting to dry your phone as the heat can cause further damage to your phone’s internal components. Similarly, you should avoid using a vacuum cleaner to suck out the water from the charging port. This can create static electricity, which can cause a short circuit inside your phone.
If you don’t have a can of compressed air, you can also try blowing air into the charging port using your mouth. However, be careful not to blow too hard, as this can push the water further into your phone or cause damage to the charging port’s pins.
Leave Your Phone to Dry for at Least 24 Hours
The fifth step in getting water out of the charging port is to let your phone dry naturally for at least 24 hours. This will give any remaining water time to evaporate completely. During this time, you should avoid turning on your phone or charging it, as this can cause further damage to its internal components. The best approach is to leave your phone alone and let it dry out in a cool, dry place.
It’s important to note that the drying time can vary depending on the amount of water that has entered your phone and its internal components. If your phone has been submerged in water, it may take longer for it to dry out completely. Similarly, if you live in a humid environment, the drying time may be longer than expected.
You can also try placing your phone in a container with silica gel packets or uncooked rice, as these materials can help to absorb any remaining moisture from your phone. However, be sure to check your phone after a few hours to avoid leaving it in the moisture-absorbing material for too long, as this can cause damage to your phone.
Once you’re confident that your phone is completely dry, you can turn it on and check if it’s working properly. If you notice any issues, such as a damaged charging port or malfunctioning buttons, it’s best to take your phone to a professional repair technician for further inspection and repair.
Conclusion
Water damage to your phone’s charging port can be a frustrating experience. However, if you act fast and follow these steps, you can save your phone from long-term damage. Remember to turn off your phone immediately—wipe away any visible moisture—use a can of compressed air—leave your phone to dry naturally for at least 24 hours—and consider using a moisture-absorbing product if necessary.